SUMMERS OPTICAL CAT#: 12400
SUMMERS PRODUCT: UV-69
DATE 06/12/2006

 

MATERIAL SAFETY DATA SHEET
CATALYST FOR LENS BOND

The information contained herein is based on data considered accurate. However, no warranty is expressed or implied regarding the accuracy of this data or the results to be obtained from the use thereof. Summers Optical assumes no responsibility for personal injury or property damage to vendees, users or third parties caused by the material. Such vendees or users assume all risks associated with the use of the material.

Summers Optical, A Division of EMS Acquisition
1560 Industry Road - P O Box 380 - Hatfield, PA 19440
TEL: (215) 412-8380 - FAX: (215) 412-8450

24 Hour Emergency Phone # Chemtrec: 800/424-9300

FOR PRODUCT AND SALES INFORMATION
CONTACT SUMMERS OPTICALS OFFICE ABOVE

 

PRODUCT IDENTIFICATION

PRODUCT NAME:

  Lens Bond Optical Cement Type UV-69

 

HAZARDOUS INGREDIENTS

 

OSHA PEL

AGGIH TLV

OTHER EXP LIMITS

% OPT

CAS#

*Styrene Momomer

50ppm TWA

50ppm

TWA

39-40

100-42-5

    100ppm STEL 100ppm STEL    
Non Toxic Polyester Resin N/E N/E   60-61 N/E
*Hazard communication purposes under Osha standard 29 CFR part 1910.1200, this chemical is listed as a potential carcinogen by Iarc. Neither the data from various long-term animal studies nor from epidemiology of workers exposed to Styrene provide an adequate basis to conclude that Styrene is carcinogenic.
N/E = NOT ESTABLISHED          

 

PHYSICAL AND CHEMICAL CHARACTERISTICS

BOILING POINT:

 150°C/295°F

MELTING POINT:

 N/E

SPECIFIC GRAVITY: (H2O=1)

 1.09

VAPOR PRESSURE: (mm Hg)

 4.5 @ 20°C

VAPOR DESITY: (Air=1)

 3.6 volatiles by volume = 43.6%

APPEARANCE/ODOR:

 Clear, amber, burgundy or blue, liquid/sweet odor

SOLUBILITY IN WATER:

 Insoluble

REACTIVITY IN WATER:

 Will not react

 

FIRE AND EXPLOSION HAZARD DATA

FLASH POINT:

 122°F/50°C

METHOD USED:

 Open Cup

EXPLOSION LEVEL-LOWER (LEL):
-UPPER (UEL):

 1.1%
6.1%

AUTO-IGNITION TEMPERATURE:

 920°F/492°C

EXTINGUISHER MEDIA:

 Dry Chemical, CO2 Foam
EXTINGUISHERS NOT TO USE: Water

FIRE FIGHTING PROCEDURES:

 Evacuate area and fight fire from a distance. Wear positive breathing apparatus and eye protection.

UNUSUAL FIRE AND EXPLOSION HAZARDS:

 Heat can cause hazardous polymerization. In closed containers this can cause violent rupture.

 

REACTIVITY DATA

STABILITY:

 Unstable

CONDITIONS TO AVOID:

 Overheating and strong light

HAZARDOUS DECOMPOSITION/
BY PRODUCTS:

 Acid fumes, Carbon Monoxide, and Carbon Dioxide

HAZARDOUS POLYMERIZATION:

 May Occur

CONDITIONS TO AVOID:

 Acids, oxidizing material, metallic halides and overheating.

 

HEALTH HAZARDS

ACUTE:

 Moderate Tissue Irritant

CHRONIC:

 Nausea, C.N.S., Depression, General Weaknes.

SIGNS AND SYMPTOMS OF EXPOSURE:

 Dizziness, drunkeness, skin rash, and nasal irritation.

MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:

 N/E, but those suffering from respiratory ailments should avoid exposure ar well as those with CNS disorders.

CHEMICAL LISTED AS A CARCINOGEN
OR POTENTIAL CARCINOGEN:

 NTP: N/A
IARC: Yes
OSHA: N/A

EMERGENCY AND FIRST
AID PROCEDURES:

 Remove to fresh air and give oxygen, rinse eyes for 20-30 minutes, wash skin thoroughly with soap and water, but do not induce vomiting.

 

ROUTES OF ENTRY:

INHALATION:

 Most likely: Could cause irritation to respiratory tract.

EYES:

 Less likely: Flush for 20-30 Minutes seek medical attention.

SKIN:

 Most likely: Minor skin irritation, wash thoroughly with soap and water.

INGESTION:

 Least likely: Do not induce vomiting, seek medical attention. LD50/ 500mg/kg.

WOUNDS:

 Wash profusely with soap and water and seek medical attention.

 

PRECAUTION FOR SAFE HANDLING AND USE

SPILLS OR LEAKS:

 Absorb with vermiculite and dispose of in accordance with Federal, State and local laws.

WASTE DISPOSAL:

 Consult Federal, State and local regulations. Small quantities can be polymerized and disposed in munipal waste systems. Large quantities can be incinerated.

STORAGE AND HANDLING:

 Keep away from high temperatures and strong light, keep away from spark or flame. Store in a well ventilated area.

 

CONTROL MEASURES

RESPIRATORY PROTECTION:

 NIOSH approved respirator when TLV is exceeded.

VENTILATION:

 Local Exhaust: Yes
Mechanical (General) Yes
Special: None

PROTECTIVE GEAR:

 Safety glasses or face shield. Neoprene apron and eyewash station.

WORK/HYGIENIC PRACTICES:

 Remove soiled clothing and wash thoroughly. Always wash skin thoroughly.

 

ECOLOGICAL INFORMATION:

ECOTOXICOLOGICAL INFORMATION:

 N/A

CHEMICAL FATE:

 N/A

 

TRANSPORT INFORMATION

DOT SHIPPING NAME:

 Polyester Resin Kit

HAZARD CLASS:

 3

PACKING GROUP:

 III

UN/NA NO:

 3269

DOT LABELS:

 Flammable Liquid

SUBSIDIARY LABELS:

 None

DOT PLACARDS:

 3, Flammable Liquid

IMO SHIPPING NAME:

 Polyester Resin Kit

HAZARD CLASS:

 3

PACKING GROUP:

 III

UN/NA NO:

 3269

SUBSIDIARY LABELS:

 NONE

IATA SHIPPING NAME:

 Polyester Resin Kit

HAZARD CLASS:

 3

PACKING GROUP:

 III

UN NO:

 3269

IATA LABELS:

 Flammable Liquid

SUBSIDIARY LABELS:

 None


REGULATORY INFORMATION

NOT APPLICABLE

Back to MSDS Menu | Back to Main Menu